+86 152 8731 0075
Get a Quote Quote
Electronics
ISO 9001 Precision enclosures and thermal components — tight flatness, clean finishes, and fast prototype iteration from one partner.

Electronics CNC Machining Services

Precision enclosures, heat sinks, connectors, and RF components for consumer electronics, telecom, and industrial automation — with tight flatness, anodized finishes, and fast prototype turnaround.

Get a Quote for This Industry
Sheet metal electronics enclosure and heat sink

Industry Overview

Precision enclosures, heat sinks, connectors, and RF components for consumer electronics, telecom, and industrial automation — with tight flatness, anodized finishes, and fast prototype turnaround.

We make high-precision components for consumer and industrial electronics — enclosures, heat sinks, connectors, and RF parts with consistent assembly fit.

Why Engineers Trust Us

Enclosure Expertise

CNC milled and sheet metal enclosures with precise cutouts, threads, and anodized finishes. IP-rated designs supported.

Thermal Management

Optimized heat sink designs with maximized surface area. Skived fin, bonded fin, and machined-from-solid options.

Rapid Prototyping

Iterate enclosure designs in 3–5 days. 3D print for fit check, then CNC for functional validation.

Typical Parts We Machine

  • Device enclosures and chassis
  • Heat sinks and thermal plates
  • RF shielding cans and lids
  • Connector housings
  • Test fixture plates
  • Display bezels and frames

Compliance & Documentation

Documentation packages that support your vendor audits, incoming inspection, and project records.

Flatness & Parallelism Heat sink bases verified on CMM for thermal performance
Anodizing Documentation Type II/III anodize with thickness verification
EMI Shielding Parts RF enclosures and conductive gasket interfaces
Rapid Prototyping 2–5 day turnaround for enclosure validation cycles

Recommended Capabilities

Processes commonly used in this industry — delivered from one partner, fewer handoffs.

Sheet Metal Fabrication

Laser-cut and bent aluminum enclosures.

Learn more

CNC Milling

Milled heat sinks and precision chassis components.

Learn more

Anodizing Finishes

Type II/III anodizing for appearance and corrosion resistance.

Learn more

3D Printing

Fit-check prototypes before committing to metal.

Learn more

Materials & Processes

Materials

  • Aluminum 6061 / 5052
  • Copper (heat sinks)
  • Brass (connectors)
  • Stainless 304
  • PEEK / Delrin

Processes

  • CNC milling
  • Sheet metal fabrication
  • Anodizing (Type II & III)
  • Sandblasting
  • Laser engraving
  • Assembly

Ready to Start Your Project?

Upload your CAD files — engineer-reviewed quote and free DFM feedback within 24 hours.

Get an Industry Quote

Frequently Asked Questions

Can you anodize aluminum enclosures?

Yes — Type II decorative and Type III hard anodizing in clear, black, and custom colors. Masking for selective anodizing available.

What flatness can you achieve on heat sinks?

Base flatness down to 0.05mm over 100mm with CMM verification. Surface roughness Ra 0.8μm on mating surfaces.

Do you offer assembly services?

Yes — PEM insert installation, sub-assembly, labeling, and kitting. Full BOM assembly on request.

Ready to Start Your Project?

Upload your CAD files and get a competitive quote within 24 hours — with free DFM feedback.

Request a Quote